It is possible to open all the fundamental elements of the model such as the engine cover, the rear boot, the door on the driver’s side and the aerodynamic cover on the passenger’s side.
All the supplementary openings of the model such as the cover for the oil cooler, the water tank are exactly reproduced. A 17-piece photo-etched grille is positioned such which allows you to see the radiator and the fan placed behind it.
The security closings of the bonnets have been reproduced replicating the leather straps supplied by Cuoio Schedoni Modena. They are finished with photo-etched buckles, locking bolt for the engine cover and pegs for fast removal of the tank, which actually work.
Just as the real car, the model perfectly reproduces the lower part of the car showing first the tubular structure of the chassis, the working suspension system, the steel crossmembers, the exhaust manifold and parts of the engine transmission.
In the front part you can notice the chassis, the water radiator, complete with the fan.
The oil tank positioned on the rear boot is perfectly reproduced with its cap, complete with script written on the tank, while it is possible to see the small anchor points supporting it.
The interior is correclty proportioned for right hand drive, the seats are reproduced in very soft leather.
The visible parts of the chassis can be seen and the visible tubular structure on the passenger’s side is highly detailed, the interior panel and the handle on the driver’s side are all exactly reproduced.
The dashboard is painted with the same colour of the car and it has got the instrumentation with the indicators of the fuel and oil pressure, the rev counter, and the water and oil gauges, and switches to control all systems.
The wooden rimmed steering-wheel is photo-etched, complete with rivets and it has got the prancing horse in the centre.
The pedal box is detailed to feature an accelerator pedal which is fixed to the base, the centre console features a working gear lever exactly as the real car.
The 12 Cylinder in V, 60 degrees engine, head visible with the bank of the carburetors, which is surmounted by the induction trumpets complete with idle screws are perfectly reproduced.
The battery, the reservoirs, the fuel pump and steering system are exactly positioned.
The Borrani wire wheels are made of turned aluminium. For the reproduction 144 holes have been made and aluminium wire has been used to create all the 72 spokes . They are fixed to the car by a three star central knock-off nut, behind the wheels, it is possible to see the drum braking system
The soft material tyres perfectly reproduce the design and the tread of the original Dunlop tyres of the original car.
NEW PACKAGING WITH ENGINE AT SIGHT AND FRONT BONNET COVER DETACHED FROM THE BODY CAR
Number of pieces that compose the model: over 880
Technical Specification:
Engine: 12 Cylinder in V 60 degrees, longditudinal, head and block from cast iron,2 valves per cylinder, single camshaft.
Bore&Stroke: 84mmX 74.5mm
Cubic capacity: 4.954 cc
Compression ratio : 9.2:1
Fuel capacity: 175 litres
Maximium power: 300 bhp @6,000 rpm
Transmission: Twin plate clutch, 4 speed with limited slip differential.
Chassis: Steel tubular in mono block, in oval section.
Front Suspension: independent, transverse arms,
Rear Suspension: De Dion Back axle, rear cross member.
Wheelbase: 2,600/1,325/1,284mm
Dry Weight: 950Kgs,
Front Tyres: 6,00-16
Rear Tyres: 7,00-16
ATTENTION: All bonnets of the models have been fixed and they have been checked. Please to open the engine bonnet, you must read and follow the instruction carefully, that you find inside the box. The belts are in real leather. We are not responsible for any damage in case of a bonnet which is not been opened in the right way.
Production of cars in 1/18 scale, high-quality, die-cast models. They are faithfully reproduced in every detail.
The Chinese technology was combined with the experience of BBR's handmade products to ensure high quality.